BOXLIGHT XP-56d Manuale Utente Scaricare il pdf (Pagina 17)

Replacing Main Lamp

Replacing Lamp Module

!When the red indicator is flashing and the lamp doesn’t lighting up, the lamp

source might abnormal or burn out.

!When the projection image is too dark, or the projection image is unstable

and flashing , please change the lamp.

!Please use specific lamp module provided by your local dealer.

!Turn off projector and unplug power cord.

!Loosen the 2 screws of the cap of lamp module.

!You need to find a special star type screwdriver.

!When screws are loosed, take off the cap of lamp module.

!Loosen the 3 screws placed on the lamp module.

!Pull up the handle of the lamp module and pull the lamp module out of

projector

!Install the new lamp module provided by your dealer into the projector.

!Fasten the 3 screws of the lamp module.

!Install the cap of lamp module then fasten 2 screws of the cap.

Lamp Module

Downloaded From projector-manual.com Boxlight Manuals

1 2 ... 12 13 14 15 16 17 18

Nessun commento

BOXLIGHT XP-56d Manuale Utente Pagina 17