BOXLIGHT Raven Manuale Utente Scaricare il pdf (Pagina 37)

x User’s Manual

1. Turn off the projector and unplug the AC

power cord.

2. Place a protective sheet (cloth) beneath

the projector. Turn the projector over so

you can access the lamp cover.

3. Remove the access panel screws and

open the panel.

4. Remove the screws on the bottom of the

lamp assembly.

5. Grasp the lamp handle and pull the lamp

assembly directly out of the projector.

6. Replace with the new lamp.

7. Place back the screws on the bottom of

lamp assembly.

8. Place the panel and screw back the

screws on the lamp cover.

w Dispose of the used lamp according to local regulations.

w Ensure that screws are tightened properly. Screws not tightened fully

may result in injury or accidents.

w Since the lamp is made of glass, do not drop the unit and do not

scratch the glass.

w Do not reuse the old lamp. This could cause the lamp to explode.

w Be sure to turn off the projector and unplug the AC power cord before

replacing the lamp.

w Do not use the projector with the lamp cover removed.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Nessun commento

BOXLIGHT Raven Manuale Utente Pagina 37